Six-Core Device Connection Cable SW-O-23 — Connector One End, Individually Terminated Cores the Other

SW-O-23 Six-Core Cable — Return Rates Are Decided at the Crimp, Not in the Copper

Six-core cable is commodity material; a six-core assembly is not. The difference shows up in the field: a technician opens a device, follows the colour code, lands six cores on a terminal block — and one core is 10mm short, or the red is actually pink under workshop lighting, or a crimp pulls out at 15N because it was made with the wrong die. That is where equipment makers lose hours and RMA budget. The Snowwolf SW-O-23 is supplied as a finished assembly: six cores, each individually terminated, with a multi-pin connector on one end and separated, terminated cores on the other — built to your wiring definition rather than cut from a reel.

The construction choices target the two failure points equipment builders actually fight. Termination integrity:​ every core is stripped, crimped and pulled-checked on the line, so a loose ferrule never reaches your assembly bench. Colour-code consistency:​ cores are identified by sleeve colour per your drawing, so the same wiring definition holds across production batches — not just on the first sample. Flexible jacketed construction keeps the bundle routeable through compact enclosures and tight cable ducts without kinking. One honest note before ordering: six cores must be specified, not assumed — tell us the conductor cross-section (mm² or AWG), cable length, connector series and the colour/pin definition, and we build and document it. Conductor gauge, cable length, connector type, colour code and jacket material are customizable.

The SW-O-23 is produced in our ISO/TS 16949-certified factory in Dongguan with a 1-year warranty. Orders start at 100 pieces at $8.50/piece FOB Shenzhen, with 15–25 day delivery, L/C or T/T payment and private labeling available. Send us your wiring drawing and connector spec — quotations return within 24 hours.

Key Advantages

✔ Individually Terminated, Not Cut From a Reel:​ Six cores stripped, crimped and pull-checked on the line — no loose ferrule reaches your bench.
✔ Colour Code That Holds Batch to Batch:​ Cores identified by sleeve colour per your drawing, so wiring definitions stay consistent across production runs.
✔ Connector One End, Split Cores the Other:​ Built as a finished assembly to your wiring definition — install-ready, not bench-ready.
✔ Routes Through Tight Enclosures:​ Flexible jacketed construction handles compact chassis and narrow cable ducts without kinking.
✔⭐Specified to Your Drawing:​ Conductor gauge, length, connector series and pin/colour definition confirmed in writing before production.
✔ Wholesale-Ready:​ MOQ 100 pcs at $8.50/pc, 15–25 day delivery, L/C or T/T, private label supported.

Product Attributes

FAQ

Q1: What are the conductor material and cross-section?​
Tell us the requirement — we build to your gauge in mm² or AWG and document it on the drawing. Confirm the section before ordering; it governs current capacity.

Q2: Can the colour code and pin definition follow our drawing?​
Yes — core identification by sleeve colour follows your wiring definition, and the same definition is held across production batches.

Q3: Is the connector replaceable with a different series?​
Yes — connector series, core count arrangement and lead length are customized; send the mating part number and we match it.

Q4: What cable length can you supply?​
Any length to your drawing; state the target length and tolerance, and we confirm before production.