RV24YN20SB502 Pre-Wired Rotary Potentiometer SW-O-19 — 24mm Carbon, 5kΩ Linear Taper, Factory-Terminated Leads

SW-O-19 Pre-Wired Potentiometer — You Buy the Pot Once; You Fight the Wiring Every Build

Anyone who has built a control panel knows the real cost isn't the potentiometer — it's the three or four flying leads: stripping 24AWG, tinning, crimping a tiny terminal, sleeving, and then discovering the lead is 15mm too short for the enclosure. Multiply that by a production batch and the labour line item dwarfs the component cost. The Snowwolf SW-O-19 is supplied the way production buyers actually want it: an RV24YN20SB502 24mm rotary potentiometer with factory-terminated lead wires, cut to your length, terminated to your connector, and continuity-checked before it leaves the line.

The component itself is the industry-standard 24mm carbon-film rotary potentiometer — 5kΩ resistance, B-taper (linear)​ per the part-number convention, with a smooth continuous wiper track suited to volume, level and position adjustment. Because it arrives pre-wired, engineers can drop it straight into a control panel, an automation fixture, an automotive auxiliary control or an equipment front panel without a soldering station at the assembly bench. One honest note on selection: the part number tells you the spec, so verify it before ordering — RV24YN20SB502 decodes as 24mm body, B-taper linear, 5kΩ (502)​. If your design needs a different value (10k, 20k, 50k) or an A-taper audio curve, tell us — we build the same assembly to your value and taper. Lead length, lead gauge, terminal/connector type and shaft length are customizable.

The SW-O-19 is produced in our ISO/TS 16949-certified factory in Dongguan with a 1-year warranty. Orders start at 100 pieces at $5.80/piece FOB Shenzhen, with 15–25 day delivery, L/C or T/T payment and private labeling available, and ocean / land / air / express shipping from Shenzhen. Send us your resistance value, lead length and connector spec — quotations return within 24 hours.

Key Advantages

✔ Pre-Wired, Not Bare:​ Factory-terminated leads cut to your length — no stripping, tinning or crimping at your assembly bench.
✔ Part Number = Full Spec:​ RV24YN20SB502 reads as 24mm body, B-taper linear, 5kΩ — you know what you're getting from the number alone.
✔ Smooth Continuous Adjustment:​ Carbon-film wiper track for steady volume, level and position control in equipment and control panels.
✔ One Family, Every Value:​ 5kΩ standard — 10k / 20k / 50k and A-taper audio curves built to order on the same assembly.
✔ Tested Before It Ships:​ Continuity and resistance checked per piece, so a bad joint never reaches your production line.
✔ Wholesale-Ready:​ MOQ 100 pcs at $5.80/pc, 15–25 day delivery, L/C or T/T, private label supported.

Product Attributes

FAQ

Q1: What does RV24YN20SB502 actually mean?​
By standard part-number convention: 24 = 24mm body, B = linear taper, 502 = 5kΩ (50 × 10²). Confirm against your drawing before ordering — we verify spec in writing on every PO

Q2: Can you supply a different resistance value or audio taper?​
Yes — 10k / 20k / 50k and A-taper audio curves are built on the same pre-wired assembly.

Q3: Can the leads and connector be built to our spec?​
Yes — lead length, lead gauge, terminal/connector type and shaft length are customized to your drawing or sample.

Q4: Is each piece tested before shipment?​
Yes — resistance and continuity are checked per piece, so a bad joint never reaches your production line.