DB15 15-Pin Shielded Data Cable SW-O-09 — Tinned Copper, EMI Shielded, 0.5mm² × 15 Cores

SW-O-09 DB15 Data Cable — In a Noisy Workshop, the Cable Is the First Thing Everyone Blames

When a walkie-talkie network drops packets or an industrial control line starts throwing errors, engineers check the radio, the controller, the software — and the last thing they suspect is usually the culprit: an unshielded or poorly shielded data cable sitting next to motors, inverters and welding equipment. The Snowwolf SW-O-09 is built to take itself off that suspect list: a DB15 15-pin shielded data cable with tinned copper cores, EMI shielding, and 15 × 0.5mm² conductors on 500V rating, engineered for walkie-talkie systems and industrial communication equipment.

Every spec earns its place in harsh service: tinned copper resists oxidation at crimp and solder joints, keeping contact resistance stable for years; the shielding layer keeps electromagnetic interference off the signal pairs in electrically noisy plants; and the PVC-jacketed build is rated for 500V / 105°C continuous working temperature, consistent with the PVC insulation specification across our cable range. One honest note before ordering: tell us the protocol and run length — DB15 carries very different signals (serial, parallel, control I/O), and cable length versus baud rate determines whether shielding alone is enough or you need twisted pairs. Wire length, connector gender and pin assignment are customizable to your wiring diagram.

The SW-O-09 is produced in our ISO/TS 16949-certified factory in Dongguan with ROHS & YACE-003 compliance and a 1-year warranty. Orders start at 100 pieces at $7.80/piece FOB Shenzhen, with 15–25 day delivery, L/C or T/T payment and private labeling available. Send us your wiring diagram and application environment — quotations return within 24 hours.

Key Advantages

✔ Shielded Where It Counts:​ EMI shielding keeps industrial noise — motors, inverters, welders — off your signal lines.
✔ Tinned Copper, Stable for Years:​ Oxidation-resistant cores keep contact resistance low at crimp and solder joints over service life.
✔ Full 15 × 0.5mm² Pinout:​ Every DB15 position populated — no missing cores, no surprise re-wiring at installation.
✔ Rated to Factory Spec:​ 500V / 105°C continuous rating, PVC insulated, documented for your engineering file.
✔ Built to Your Diagram:​ Wire length, connector gender and pin assignment customized — OEM/ODM supported.
✔ Wholesale-Ready:​ MOQ 100 pcs at $7.80/pc, 15–25 day delivery, L/C or T/T.

Product Attributes

FAQ

Q1: Is every one of the 15 pins populated?​
Yes — full 15 × 0.5mm² core configuration, all DB15 positions wired. No missing cores at installation.

Q2: Will the shielding be enough for my environment?​
Tell us the protocol, baud rate, run length and nearby interference sources (motors, inverters, welders) — we confirm whether standard shielding suffices or a twisted-pair build is needed.

Q3: Can you make custom length and connector gender?​
Yes — wire length, DB15 male/female configuration and pin assignment are customized to your wiring diagram.

Q4: Is there a volume discount?​
MOQ is 100 pcs at $7.80/pc; tiered pricing available for volume orders — send your target quantity.